Latest plotter Models Hyderabad, Telangana
Plotter
Pricelist of Best plotter Models
- Brand: Graphtec
- Model No: FC9000 160 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 1626mm × 50m
- Cutting area of guaranteed accuracy (*1): 1607mm × 10m 894mm × 15m
- Mountable media width (*2): Min. 50mm
- Mountable roll media diameter: 76 to 200mm (160mm when the optional paper flange (OPH-A21) is installed)
- Mountable roll media mass: 24kg
- Maximum cross cut width : 1626mm
- Max. cutting speed: 1485mm/s at 45° direction
- Axial acceleration: Max. 39.2m/s2 at 45° direction
- Cutting force: Max. 5.88N (600gf)
- Minimum character size: Approx. 3 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Number of push rollers: 4 rollers
- Mountable number of tools: 1 tool (mountable 2 tools (option))
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Display: Graphic type LCD with back-light (240dots × 128dots), supports 10 languages
- Interface: USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Power source: 100 V to 240 V AC, 50 / 60 Hz
- Power consumption: Max. 120 W
- Operating environment : 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- External dimensions (W × D × H): 2224?1151?1232 mm
- Weight: 70 kg
- Brand: Graphtec
- Model No: FC9000 140 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 1372mm × 50m
- Cutting area of guaranteed accuracy (*1): 1352mm × 10m 894mm × 15m
- Mountable media width (*2): Min. 50mm
- Mountable roll media diameter: 76 to 200mm (160mm when the optional paper flange (OPH-A21) is installed)
- Mountable roll media mass: 20kg
- Maximum cross cut width: 1372mm
- Max. cutting speed: 1485mm/s at 45° direction
- Axial acceleration: Max. 39.2m/s2 at 45° direction
- Cutting force: Max. 5.88N (600gf)
- Minimum character size: Approx. 3 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Number of push rollers: 4 rollers
- Mountable number of tools: 1 tool (mountable 2 tools (option))
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Display: Graphic type LCD with back-light (240dots × 128dots), supports 10 languages
- Interface: USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Power source: 100 V to 240 V AC, 50 / 60 Hz
- Power consumption: Max. 120 W
- Operating environment : 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- External dimensions (W × D × H): 1970?1151?1232 mm
- Weight: 64 kg
- Brand: Graphtec
- Model No: FC9000 100 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 1067mm × 50m
- Cutting area of guaranteed accuracy (*1): 1047mm × 10m 762mm × 15m
- Mountable media width (*2): Min. 50mm
- Mountable roll media diameter: 76 to 200mm (160mm when the optional paper flange (OPH-A21) is installed)
- Mountable roll media mass: 16kg
- Maximum cross cut width: 1067mm
- Max. cutting speed: 1485mm/s at 45° direction
- Axial acceleration: Max. 39.2m/s2 at 45° direction
- Cutting force: Max. 5.88N (600gf)
- Minimum character size: Approx. 3 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Number of push rollers: 3 rollers
- Mountable number of tools: 1 tool (mountable 2 tools (option))
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Display: Graphic type LCD with back-light (240dots × 128dots), supports 10 languages
- Interface: USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Power source: 100 V to 240 V AC, 50 / 60 Hz
- Power consumption: Max. 120 W
- Operating environment: 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- External dimensions (W × D × H): 1665?1151?1232 mm
- Weight: 56 kg
- Brand: Graphtec
- Model No: FC9000 75 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 762mm × 50m
- Cutting area of guaranteed accuracy (*1): 742mm × 15m
- Mountable media width (*2): Min. 50mm
- Mountable roll media diameter: 76 to 200mm (160mm when the optional paper flange (OPH-A21) is installed)
- Mountable roll media mass: 12kg
- Maximum cross cut width: 762mm
- Max. cutting speed: 1485mm/s at 45° direction
- Axial acceleration: Max. 39.2m/s2 at 45° direction
- Cutting force: Max. 5.88N (600gf)
- Minimum character size: Approx. 3 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Number of push rollers: 2 rollers
- Mountable number of tools: 1 tool (mountable 2 tools (option))
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Display: Graphic type LCD with back-light (240dots × 128dots), supports 10 languages
- Interface: USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Power source: 100 V to 240 V AC, 50 / 60 Hz
- Power consumption: Max. 120 W
- Operating environment : 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- External dimensions (W × D × H): 1360?1151?1232 mm
- Weight: 49 kg
- Brand: Mimaki
- Model No: CG 130FXII Plus Cutting Plotter
- Acceptable sheet width: 90mm~1,580mm (3.54"~62.0")
- Rolled media weight: 18kg (40 lb) or less
- Roll outsied diameter: ?200mm (7.87") or less
- Effective cutting area *1: 1,300mm x 51m (51.2" x 167')
- Maximum auto cutting width *2: 1,425mm (56.1")
- Maximum cutting speed: 100cm/s (39.3"/s)
- Maximum moving speed: 140cm/s (55"/s) (In a 45° direction and in a pen-up state)
- Mechanical resolution: 5µm (0.0002")
- Command resolution: 25?m, 10?m(MGL-IIc), 100?m, 50?m(MGL-Ic1)
- Repeatability: ±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
- Accuracy assurance range (Repeatability): 1,300mm x 10m (51.2" x 32.8')
- Max. pressure: 500g
- Acceptable sheet *4: Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet
- Acceptable sheet for pouncing *5: Paper thickness: 0.06~0.13mm (0.0024"~0.005")
- Applicable tools *6: Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
- Type of command: MGL-II c / I c1
- Interface: RS-232C, USB
- Receiver buffer size: 30MB Standard (20MB when in sorting)
- Operational environment: Temperature: 5~35°C (41~95°F), 35%–75% RH (Non-condensing)
- Power requirement: AC100V~240V?1A 50/60Hz
- Power consumption: 100W or less
- Dimensions (WxDxH): 1,825mm(71.8")x 700mm(27.5")x 1,217mm(47.9")
- Weight: 62kg (137 lb)
- Brand: Mimaki
- Model No: CG 75FXII Plus Cutting Plotter
- Acceptable sheet width: 90mm~1,040mm (3.54"~40.9")
- Rolled media weight: 18kg (40 lb) or less
- Roll outsied diameter: ?200mm (7.87") or less
- Effective cutting area *1: 760mm x 51m (29.9" x 167')
- Maximum auto cutting width *2: 870mm (34.2")
- Maximum cutting speed: 100cm/s (39.3"/s)
- Maximum moving speed: 140cm/s (55"/s) (In a 45° direction and in a pen-up state)
- Mechanical resolution: 5µm (0.0002")
- Command resolution: 25?m, 10?m(MGL-IIc), 100?m, 50?m(MGL-Ic1)
- Repeatability: ±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
- Accuracy assurance range (Repeatability): 760mm x 10m (29.9" x 32.8')
- Max. pressure: 500g
- Acceptable sheet *4: Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet
- Acceptable sheet for pouncing *5: Paper thickness: 0.06~0.13mm (0.0024"~0.005")
- Applicable tools *6: Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
- Type of command: MGL-II c / I c1
- Interface: RS-232C, USB
- Receiver buffer size: 30MB Standard (20MB when in sorting)
- Operational environment: Temperature: 5~35°C (41~95°F), 35%–75% RH (Non-condensing)
- Power requirement: AC100V~240V?1A 50/60Hz
- Power consumption: 100W or less
- Dimensions (WxDxH): 1,285mm(50.5")x 700mm(27.5")x 1,217mm(47.9")
- Weight: 47kg (104 lb)
- Brand: Mimaki
- Model No: CG 130AR Cutting Plotter
- Acceptable sheet width: 90 - 1,550 mm (3.5 - 61.0")
- Effective cutting area *1: 1,370 mm × 51 M (53.9" x 167.3')
- Maximum speed: Cutting: Cutting: 73 cm/s (28.7"/s), Moving at 45° direction: 103 cm/s (40.5"/s)
- Adjustable speed range: 1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9"/s (0.4"/s step adjustment) 10 - 73 cm/s (5 cm/s step adjustment): 4.0 - 28.7"/s (2.0"/s step adjustment)
- Mechanical resolution: X direction: 2.5 ?m, Y direction: 5 ?m
- Command resolution: 25 ?m, 10?m?MGL-IIc? / 100 ?m, 50 ?m?MGL-Ic1)
- Repeatability *2: ± 0.2 mm / 2 M
- Effective Repeatability: 1,350 mm × 2 M
- Maximum pressure: 550g
- Type of command: MGL-IIc / MGL-Ic1
- Interface: USB, RS-232C, Ethernet
- Receiver buffer size: About 27 MB as standard (17 MB when sorting is effective)
- Operational environment: Temperature: 5 - 35 degC (41 - 95 degF), Humidity: 35 - 75 ? Rh (Non-condensing)
- Power supply: AC 100 V - 240 V 1A 50/60Hz
- Power consumption: 228W or less
- Dimensions: 1,810 × 580 × 1,160 mm (71.3 × 22.8 × 45.7")
- Weight: 43kg (94.8 lb)
- Brand: Mimaki
- Model No: CG 100AR Cutting Plotter
- Acceptable sheet width: 90 - 1,250 mm (3.5 - 49.2 inch)
- Effective cutting area *1: 1,070 mm × 51 M (42.1" x 167.3')
- Maximum speed: Cutting: Cutting: 73 cm/s (28.7"/s), Moving at 45° direction: 103 cm/s (40.5"/s)
- Adjustable speed range: 1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9"/s (0.4"/s step adjustment), 10 - 73 cm/s (5 cm/s step adjustment): 4.0 - 28.7"/s (2.0"/s step adjustment)
- Mechanical resolution: X direction: 2.5 ?m, Y direction: 5 ?m
- Command resolution: 25 ?m, 10?m?MGL-IIc? / 100 ?m, 50 ?m?MGL-Ic1
- Repeatability *2: ± 0.2 mm / 2 M
- Effective Repeatability: 1,050 mm × 2 M
- Maximum pressure: 550g
- Type of command: MGL-IIc / MGL-Ic1
- Interface: USB, RS-232C, Ethernet
- Receiver buffer size: About 27 MB as standard (17 MB when sorting is effective)
- Operational environment: Temperature: 5 - 35 degC (41 - 95 degF), Humidity: 35 - 75 ? Rh (Non-condensing)
- Power supply: AC 100 V - 240 V 1A 50/60Hz
- Power consumption: 228W or less
- Dimensions: 1,510 × 580 × 1,160 mm (59.4 × 22.8 × 45.7")
- Weight: 35kg (77.2 lb)
- Brand: Mimaki
- Model No: CG 60AR Cutting Plotter
- Acceptable sheet width: 90 - 740 mm (3.5 - 29.1 inch)
- Effective cutting area *1: 606 mm × 51 M (23.9 inch x 167.3 inch)
- Maximum speed: Cutting: 73 cm/s (28.7"/s), Moving at 45° direction: 103 cm/s (40.5"/s)
- Adjustable speed range: 1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9"/s (0.4"/s step adjustment), 10 - 73 cm/s (5 cm/s step adjustment): 4.0 - 28.7"/s (2.0"/s step adjustment)
- Mechanical resolution: X direction: 2.5 ?m, Y direction: 5 ?m
- Command resolution: 25 ?m, 10?m?MGL-IIc? / 100 ?m, 50 ?m?MGL-Ic1)
- Repeatability *2: ± 0.2 mm / 2 M
- Effective Repeatability: 586 mm × 2 M
- Maximum pressure: 550g
- Type of command: MGL-IIc / MGL-Ic1
- Interface: USB, RS-232C, Ethernet
- Receiver buffer size: About 27 MB as standard (17 MB when sorting is effective)
- Operational environment: Temperature: 5 - 35 degC (41 - 95 degF), Humidity: 35 - 75 ? Rh (Non-condensing)
- Power supply: AC 100 V - 240 V 1A 50/60Hz
- Power consumption: 168W or less
- Dimensions: 1,010 × 355 × 355 mm (39.8 × 14.0 × 14.0") 1,010 × 580 × 1,160 mm *6 (39.8 × 22.8 × 45.7") *6
- Weight: 17kg (37.5 lb) 27kg (59.5 lb) *6
Your Go-To Source for High-Performance IT Equipment
As leading plotter dealers in the IT hardware industry, we are committed to delivering reliable, high-performance server solutions that cater to the dynamic needs of modern businesses. Our extensive portfolio includes a wide range of servers—rack servers, tower servers, blade servers, and customized enterprise-grade systems—from globally recognized brands such as Dell, HP, Lenovo, Cisco, and more. Whether you are a small business looking for an entry-level server or a large enterprise seeking powerful, scalable data center infrastructure, we provide tailored solutions that align with your technical requirements and budget.
Our services go beyond just sales—we offer expert consultation to help clients choose the right server configurations based on workload, performance goals, and scalability. Each product we supply is rigorously tested for quality assurance and comes with warranty options and after-sales support, ensuring peace of mind and long-term performance. With a team of knowledgeable professionals, competitive pricing, and a customer-centric approach, we have established ourselves as a trusted partner for businesses, IT integrators, system administrators, and government organizations.
Whether you're upgrading your existing infrastructure, setting up a new data center, or integrating servers into a hybrid IT environment, our goal is to deliver dependable hardware solutions that empower your operations and drive digital transformation.